Dwyer | Mercoid | WE Anderson | Flotect

Dwyer Series DM2000 Differential Pressure Transmitter

Series DM-2000 Differential Pressure Transmitter

Same Size as Standard Magnehelic® Differential Pressure Gage

The Dwyer Series DM2000 Differential Pressure Transmitter senses the pressure of air and compatible gases and sends a standard 4-20 mA output signal. The DM2000 housing is specifically designed to mount in the same diameter cutout as a standard Magnehelic® gage. A wide range of models are available factory calibrated to specific ranges.

Pressure connections are inherent to the glass filled plastic molded housing making installation quick and easy. Digital push-button zero and span simplify calibration over typical turn-potentiometers. An optional 3.5 digit LCD shows process and engineering units. A single bush button allows field selection of 4 to 6 engineering units depending on range. Download

 

Dwyer Series DM2000 Specifications

  • Service:Air and non-combustible, compatible gases.
  • Wetted Materials:Consult Factory.
  • Accuracy:±1% F.S. at 70°F.
  • Stability:+1% F.S./yr.
  • Temperature Limits:20 to 120°F (-6.67 to 48.9°C).
  • Pressure Limits:10 psig (0.69 bar).
  • Thermal Effect:±0.055% F.S./°F (0.099% F.S./°C).
  • Power Requirements:10-35 VDC (2 wire).
  • Output Signal:4 to 20 mA.
  • Zero and Span Adjustments:Digital push-button zero and span.
  • Loop Resistance:DC: 0-1250 ohms maximum.
  • Current Consumption:DC: 38 mA maximum.
  • Electrical Connections:Screw-type terminal block.Display:3.5 digit LCD, 0.7″ height.
  • Process Connections:1/8″ I.D. tubing.
  • Mounting Orientation:Vertical.
  • Weight:4.8 oz (136 g).

 

Available Models


Models with LCD Display


Models without LCD Display


 

Download